How To Open Iso On Sheepshaver Mac

To unhide them, open Finder, and click on File - Preferences in the menu bar at the top of Mac OS X. Under the “Sidebar” settings, check “Hard disks”, so that Finder will display your virtual machine’s hard disks in the sidebar.

(There's no video for QEMU for Windows - PPC emulator, runs Mac OS 9.1, 9.2 + OSX 10.0 to 10.5 yet. Please contribute to MR and add a video now!)

What is QEMU for Windows - PPC emulator, runs Mac OS 9.1, 9.2 + OSX 10.0 to 10.5?

QEMU is a very versatile and extremely broadly supported open source virtual machine emulator. In 2016, QEMU could finally achieve what has never been possible before: emulating Mac OS 9.0.4, 9.1 and 9.2.2 (albeit still it's quite slow and the sound support is kind of buggy at the moment). Note that QEMU can also emulate Mac OS X 10.0 up to 10.5. At some point in the near future hopefully, QEMU will fully replace SheepShaver, but at the moment, SheepShaver still runs faster in most situations.

Advantages of using QEMU vs SheepShaver:

Mac OS 9.1.x and 9.2.x emulation (SheepShaver cannot)
Much more stable networking (SheepShaver randomly crashes while using the networking features)
Cursor animation (or anything else for the matter) does not reset the pointer in the host OS (SheepShaver does and it's annoying!)
QEMU can run on almost all imaginable CPU architectures, even ARM (e.g.: Raspberry Pi)

These bundles were put together by 'that-ben' and are intended to be the easiest possible for beginners. Just launch the 'QEMU - Mac OS 9.2.2.bat' (or 'QEMU - Mac OS X Tiger 10.4.11.bat') file and wait 30 seconds for Mac OS to boot up. Nevermind the yellow screen with a VRAM partition not found error, it will go past this without any problem. The Mac OS 9 package contains a 1GB disk image on which Mac OS 9.2.2 is already fully installed. The Mac OS X package contains Mac OS X 10.4.11. BTW, if you need a larger disk image, you can grab one instantly from here: Blank hard drive disk images (3GB HFS up to 30GB HFS+)

Networking is fully functional thanks to the sungem driver that's already pre-configured in these downloads. Right out of the box, it will network through your host machine but on its own subnet branch. The virtual machine's IP will be like 10.0.x.x. Your Windows host IP would likely be something like 192.168.x.x but what's nice is that the virtual machine can still tunnel back to your host machine's subnet branch. So, for instance, you could perfectly well make a server/client environment between Mac OS 9 in QEMU and your Windows host machine.

Pre-installed software in the Mac OS 9.2.2 package includes:

Classilla 9.3.3 for surfing the web
QuickTime 6.0.3 for multimedia playback
Stuffit Deluxe 7.0.3 for extracting/compressing Stuffit archives
Toast Titanium 5.2.3 for mounting/creating CD images (such as .iso, .cdr or .toast)
DiskCopy 6.5b13 for mounting floppy disk images (such as .img or .dsk)

Pre-installed software in the Mac OS X 10.4.11 package includes:

Safari 4.1.3 (2010) for surfing the web
QuickTime 7.6.4 (2009) for multimedia playback
All security patches for Mac OS X 10.4.11
Coming soon: The Unarchiver 2.3 (2015) for extracting/compressing Stuffit archives

See also:Basilisk II - a 68K emulator with floppy support

Qemu_(20171224)_-_PPC_-_Mac_OS_X_10.4.11.rar(1197.59 MiB / 1255.76 MB)
QEMU (2017/12/15 build) for Windows w/ Mac OS X 10.4.11 pre-installed, RAR'ed / RAR archive

130 / 2018-01-28 / 63bc2a712f342b55ae25eb4397e1f3ad097e71be / /

Qemu (20190212) - PPC - Mac OS 9.2.2.rar(125.04 MiB / 131.11 MB)
QEMU (2019/02/12 build) for Windows w/ Mac OS 9.2.2 pre-installed / RAR archive

842 / 2019-03-19 / 16daa6ef096db9391dd15e8a486e6c2648011b22 / /

Architecture

Crusader kings 2 review. The Dark Ages might be drawing to a close, but Europe is still in turmoil. Petty lords vie against beleaguered kings who struggle to assert control over their fragmented realms. The Pope calls for a Crusade to protect the Christians in the Holy Land even as he refuses to relinquish control over Title: Crusader Kings II.

Intel x86-64

This program is for Windows.

USEFUL TIPS WHEN USING QEMU:

To install another Mac OS version, exit QEMU if it's running and then simply edit the 'QEMU - Boot with a CD ISO.bat' command file with the Notepad to reflect your actual install CD ISO file location and launch that batch file.
To capture/uncapture the mouse pointer, hit CTRL-ALT together. Since 2018, it's now CTRL-ALT-G.
To go toggle the full screen mode on or off, hit CTRL-ALT-F.
Hit CTRL-ALT-2 together to open/close the QEMU console. DO NOT HIT THE X TO CLOSE THAT WINDOW OR IT WILL INSTANTLY EXIT THE WHOLE QEMU AND THE VIRTUAL MACINTOSH WITH IT.
To hot-attach a disk image ISO, in the QEMU console, adapt this command: change ide1-cd0 C:/path/to/file.iso
To hot-detach a disk image ISO, first in OS9, put it the trash, then in the QEMU console, type this: eject ide1-cd0

Page 1 of 1 [ 1 post ]

Print view

Previous topic Next topic

Author

Message

Post subject:Mac OS 9.0.4 in Sheepshaver On Windows

Granny Smith

Joined: Thu Jan 05, 2017 6:24 pm
Posts: 108

WARNING: The following post is a TUTORIAL a tutorial is someone showing you how to do something on, or with something.
Hi! Today, i'm going to show you..
Part 1: What you need:
Sheepshaver, (with GUI, SDL.dll, etc, select “To get started, always download this”) Go to Sheepshaver On windows for this download.
GTK 2+ Runtime, Go to sheepshaver on windows and click on GTK 2+. If it does say it will harm your computer, ignore the message.
Mac OS 9.0.4.iso ISO on the internet (Winworldpc.com is a good website)
New World ROM, Link: http://www.redundantrobot.com/#/sheepshaver
Once you get all the links, Let's start!
Part 2:
Configuring up Mac OS 9.0.4 in the GUI
1. Extract all the files and put them in the sheepshaver folder, also download the GTK runtime as well
2. Rename the ROM to Mac OS ROM (Letters, capitals, and spaces are CASE SENSITIVE! Rename to the ROM name above, and make sure you get rid of the extension .rom)
3. (MAKE SURE YOU HAVE THE GTK2+ RUNTIME INSTALLED) Open up the GUI.
4. Enable your CD-DVD ROM Drive, it should be drive E:
5. Enable My Computer so you can access your windows files on a mac (Pretty cool that you can do that huh?)
6. Create a hard drive, name it whatever you want I named mine Mac OS 9.0.4 make sure you add the extension .hfv, Recommended size is 500MB, but I will put up to 1000MB (1GB), and click OK, it will take 3-30 seconds to create, depending on the speed of the computer
7. Click Add, and add the ISO
8. Go to Graphics/Sound and select the following:
Window: Window
Windows Refresh Rate: Dynamic
Length x Width (L x W): Whatever size can work (Recommended: 800x600).
9. Go to Memory/Misc and put the RAM to 512MB, and check 'Ignore Illegal Memory Accesses'
Part 3:
Booting Up
Click Start (NOTE: You will get an error saying The following file is missing, C:System32driverscdenable.sys or something like that, ignore that)(I actually checked, IT'S IN THAT FOLDER, IDK WHY IT SAYS IT'S MISSING)
You will get an error saying something that 'it only functions on original media.' That's because our ISO is a Read, and Write, you need to first exit sheepshaver, (The X won't work so go to Task Manager, find sheepshaver, and click, End Task.)
Go to the ISO, Properties, and select 'Read-Only'.
Then go to the GUI, click start, ignore the error, and THIS TIME, it will boot up, you will get a CD background, and you will boot up into Mac OS 9.
Now it's time for the fun part.
Part 4:
Setup
(The following you must pay attention carefully to make sure it installs. Press Continue/Select/Agree/Start after you complete the each step from the installer.)
1. You will get a screen saying that the disk is unreadable, name it to whatever and make sure it's selected as Standard, make sure you select Initialize, and Continue.
2. A setup folder will pop up, select Mac OS 9 Install
3. Select Mac OS 9, or whatever you named your disk as your destination.
4. You can read the 'Before You Install' if you like.
5. Accept the agreement
6. You can customize your installation, but i recommend you keep the recommended stuff for installing, then, Click Start.
7. Installing for Mac OS 9 will take 4-30 minutes depending on the speed of your computer.
8. Once the installation is done, select Quit, and then restart.
Part 5:
Setup Part 2
1. Close the Mac OS 9 Disk, and click next from the setup assistant.
2. Select your country's language
3. Type your name, and (optional) what company you work for.
4. Check and see if your date and time is correct, and if you do daylight savings time.
5. Now select your location, most likely, your city that you live in won't be there, so select the city that you live in.
6. We don't want to use simple finder, so click no.
7. Type in a computer name, and a password (optional).
8. After that, your computer (Mac OS 9) will freeze up, so go to task manager, and close out sheepshaver, and start it back up again. (MAKE SURE YOU REMOVE THE ISO FROM THE GUI!!)
9. Mac OS will check the disk because you had to force close it. Once it's done, Click Done.
CONGRATULATIONS! You have installed Mac OS 9.04 in Sheepshaver on Windows!
That's All! Now go have fun with Mac OS 9.04
-Meow_2004

Top

Page 1 of 1 [ 1 post ]